InterNACHI Message Board - IAC2 Forum http://www.nachi.org/forum This forum is hosted by InterNACHI for members of the International Association of Indoor Air Consultants. en Fri, 20 Nov 2009 22:34:47 GMT vBulletin 60 http://nachi.cachefly.net/forum/images/2006/misc/rss.jpg InterNACHI Message Board - IAC2 Forum http://www.nachi.org/forum Formaldehyde. Please proof this new inspection article. http://www.nachi.org/forum/f50/formaldehyde-please-proof-new-inspection-article-45295/ Fri, 20 Nov 2009 18:26:54 GMT http://www.nachi.org/formaldehyde.htm http://www.nachi.org/formaldehyde.htm ]]> IAC2 Forum gromicko http://www.nachi.org/forum/f50/formaldehyde-please-proof-new-inspection-article-45295/ Construction Mold http://www.nachi.org/forum/f50/construction-mold-45112/ Sat, 14 Nov 2009 14:00:14 GMT Would say this was construction mold? Home is 15 years old. Several areas on b floor joist. Home has been vacant for sometime. Should I recommend a mold test? Thanks! Would say this was construction mold? Home is 15 years old. Several areas on b floor joist. Home has been vacant for sometime. Should I recommend a mold test?

Thanks!
Attached Thumbnails
Click image for larger version Name: 112.jpg Views: N/A Size: 42.4 KB ID: 33293  
]]> IAC2 Forum bhartley http://www.nachi.org/forum/f50/construction-mold-45112/ Monitor vs Carbon testing http://www.nachi.org/forum/f50/monitor-vs-carbon-testing-45026/ Wed, 11 Nov 2009 23:48:44 GMT Has anyone ever used both test at the same time? I am curious as to how acurate the simple carbon testers are vs the expensive monitor. Has anyone ever used both test at the same time? I am curious as to how acurate the simple carbon testers are vs the expensive monitor. ]]> IAC2 Forum sfogarty http://www.nachi.org/forum/f50/monitor-vs-carbon-testing-45026/ Radon Testing Equipment http://www.nachi.org/forum/f50/radon-testing-equipment-45019/ Wed, 11 Nov 2009 20:15:36 GMT Does anyone have a good source for radon testing equipment? Does anyone have a good source for radon testing equipment? ]]> IAC2 Forum ejones2 http://www.nachi.org/forum/f50/radon-testing-equipment-45019/ Mold Testing in businesses http://www.nachi.org/forum/f50/mold-testing-businesses-45013/ Wed, 11 Nov 2009 15:15:45 GMT Do you guys perform mold testing in businesses? If so do you do anything differently? Do you guys perform mold testing in businesses? If so do you do anything differently? ]]> IAC2 Forum ejones2 http://www.nachi.org/forum/f50/mold-testing-businesses-45013/ Mold pump on sale for $145.00 http://www.nachi.org/forum/f50/mold-pump-sale-145-00-a-44998/ Wed, 11 Nov 2009 00:22:24 GMT EMSL has the E-Lite high volume pump on sale for $145.00 The offer is for today and tommorrow. $20 bucks less than anywhere else. I just bought one. EMSL has the E-Lite high volume pump on sale for $145.00 The offer is for today and tommorrow. $20 bucks less than anywhere else. I just bought one. ]]> IAC2 Forum sfogarty http://www.nachi.org/forum/f50/mold-pump-sale-145-00-a-44998/ Radon Testing http://www.nachi.org/forum/f50/radon-testing-44926/ Sun, 08 Nov 2009 22:02:59 GMT I was looking into getting radon testing. Does the NACHI radon course prepare a person to take the radon certification test? Is there licensing requirements in Missouri for radon testing? I was looking into getting radon testing. Does the NACHI radon course prepare a person to take the radon certification test? Is there licensing requirements in Missouri for radon testing? ]]> IAC2 Forum Erik Jonas http://www.nachi.org/forum/f50/radon-testing-44926/ FL DBPR mold meeting summary http://www.nachi.org/forum/f50/fl-dbpr-mold-meeting-summary-44890/ Sat, 07 Nov 2009 18:25:35 GMT Bottom of page http://www.myfloridalicense.com/dbpr/pro/mold/index.html Bottom of page

http://www.myfloridalicense.com/dbpr...old/index.html ]]> IAC2 Forum douglas http://www.nachi.org/forum/f50/fl-dbpr-mold-meeting-summary-44890/ Mold retesting http://www.nachi.org/forum/f50/mold-retesting-44864/ Fri, 06 Nov 2009 22:00:19 GMT We have been doing verification mold testing with a newer mold remediator here in town. We have done about 5 post tests for this remediator and about 4 has failed. When we retest the number count for mold spors is usually quite a bit higher than the pretest. Penecilium is what we usually find which is pretty common around here. The remediator is trying to blame us. Any thoughts? We have been doing verification mold testing with a newer mold remediator here in town. We have done about 5 post tests for this remediator and about 4 has failed. When we retest the number count for mold spors is usually quite a bit higher than the pretest. Penecilium is what we usually find which is pretty common around here. The remediator is trying to blame us. Any thoughts? ]]> IAC2 Forum Erik Jonas http://www.nachi.org/forum/f50/mold-retesting-44864/ how many get both signed? http://www.nachi.org/forum/f50/many-get-both-signed-44785/ Wed, 04 Nov 2009 04:36:13 GMT hello how many people get both the *mold *waiver and the *mold* agreement signed? hello

how many people get both the mold waiver
and the mold agreement signed? ]]> IAC2 Forum enorthe http://www.nachi.org/forum/f50/many-get-both-signed-44785/ Assessment Certification update http://www.nachi.org/forum/f50/assessment-certification-update-44621/ Thu, 29 Oct 2009 19:54:11 GMT Since this may affect mold inspectors in Arkansas, Maryland and possibly Florida, I thought I'd share this email I recieved.

October 29, 2009
Imminent Industry Changes
Have you taken the time to ponder what's happening with industry certifications? The
January ANSI/NOCA 1100 Standard has laid the groundwork for imminent change. The
standard's definition of assessment-based certificates issued by associations and course
providers can be clearly applied to most so-called certifications in the IAQ industry.

Standard 1100, which prohibits people from using acronyms or the word "certified" to describe their assessment-based certificates is only a first step. The move to professionalize industry certifications is ongoing with more new standards in process. Soon, training certificates issued as "certifications" are going to be seriously questioned by your peers and the courts.

Those who hold board-awarded certifications through the American Council for Accredited Certification (ACAC) can rest assured they have professional certifications.

Click here to learn more about ACAC certification: www.acac.org

Other info:
http://acac.org/forms/otherpdfs/NOCA...cle%203-09.pdf

http://acac.org/forms/otherpdfs/PR52008.pdf (Maryland)

Arkansas:
To be licensed, mold investigators, as the law describes them, will have to be certified as an industrial hygienist by the American Board of Industrial Hygiene; as a microbial consultant or indoor environmental consultant by the American Indoor Air Quality Council (now the ACAC); or must successfully complete at least 20 hours of college-level microbiology.
]]> IAC2 Forum douglas http://www.nachi.org/forum/f50/assessment-certification-update-44621/ <![CDATA[Today's Daily Door Prize! First 2 Members to Reply Wins!]]> http://www.nachi.org/forum/f50/todays-daily-door-prize-first-2-members-reply-wins-44521/ Mon, 26 Oct 2009 16:16:10 GMT First 2 members to reply wins this prize... http://www.inspectoroutlet.com/how-to-perform-a-proper-mold-inspection-book.aspx I will send your prize to the address provided in your member profile unless specified. First 2 members to reply wins this prize...

http://www.inspectoroutlet.com/how-t...tion-book.aspx

I will send your prize to the address provided in your member profile unless specified. ]]> IAC2 Forum cjackson2 http://www.nachi.org/forum/f50/todays-daily-door-prize-first-2-members-reply-wins-44521/ Dry Ice blasting http://www.nachi.org/forum/f50/dry-ice-blasting-44456/ Fri, 23 Oct 2009 01:51:28 GMT Got a remediation company talking about dry ice blasting, anyone seen it done? Got a remediation company talking about dry ice blasting, anyone seen it done? ]]> IAC2 Forum jmerritt1 http://www.nachi.org/forum/f50/dry-ice-blasting-44456/ <![CDATA[Today's Daily Door Prize! First 3 Members to Reply Wins!]]> http://www.nachi.org/forum/f50/todays-daily-door-prize-first-3-members-reply-wins-44437/ Thu, 22 Oct 2009 17:00:00 GMT First 3 members to reply to this post will receive this prize! http://www.inspectoroutlet.com/how-to-perform-radon-inspections.aspx * I will ship to the address provided in your member profile unless specified. First 3 members to reply to this post will receive this prize!
http://www.inspectoroutlet.com/how-t...spections.aspx

* I will ship to the address provided in your member profile unless specified. ]]> IAC2 Forum cjackson2 http://www.nachi.org/forum/f50/todays-daily-door-prize-first-3-members-reply-wins-44437/