International Association of Certified Home Inspectors
|
|||||||
| General Inspection Discussion This is a place for general discussion about the home inspection industry. Try to keep the posts topical, but they need not be as specific as the other areas of this board. |
![]() |
|
|
LinkBack | Thread Tools |
|
#1
|
||||
|
||||
|
In this excellent (and quick) read are 7 excellent reasons why, when remodeling, you should always seal the air leaks. Blower door testing before and after the air sealing efforts will tell you (1) how bad your home is leaking air and (2) how effective the air sealing efforts were.
James H. Bushart Professional Building Analyst, BPI Missouri, Kansas and Arkansas 314-803-2167 Inspecting in Aurora, Branson, Carthage, Granby, Joplin, Kimberling City, Monett, Mount Vernon, Neosho, Nixa, Purdy, Reed Spring, Republic, Springfield and surrounding areas.
|
| Need a home inspection in New Hampshire? Check out InterNACHI's listing of New Hampshire certified home inspectors. Or, find a home inspector anywhere in the world with our inspection search engine. |
|
#2
|
||||
|
||||
|
Quote:
Thanks Joe Had my home done last year . This is where I stopped . This is how I sealed my joices 6 inches on glass and no air can get in . |
|
#3
|
||||
|
||||
|
Just make sure that you have a good EGR system, to make sure that you have the required air ventilation.
Will Decker, CMI ILL License # 450.0002240 Board Certified Master Inspector Decker Home Services, LLC Chicago and Northern Suburban Home Inspections Office: (847) 676-8393 Cell: (847) 609-2345 Home: (847) 673-2702 wjd@DeckerHomeServices.com www.DeckerHomeServices.com Learn, Educate, Serve and have fun doing it! |
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Roof Leaks | jharrison | Roofing Inspections | 5 | 9/19/10 7:02 PM |
| Total galvanic reaction? | jtribuzio | Plumbing Inspections | 19 | 4/3/10 2:18 AM |
| Common Defects List by Age of House | trausch | Inspection Education & Training | 10 | 6/12/06 4:52 AM |