International Association of Certified Home Inspectors
|
|||||||
| General Inspection Discussion This is a place for general discussion about the home inspection industry. Try to keep the posts topical, but they need not be as specific as the other areas of this board. |
![]() |
|
|
LinkBack | Thread Tools |
|
#1
|
|||
|
|||
|
My head is starting to hurt thinking about this.
Does the landing for ADA compliance need to be 5x5 at the entry. I think it does. I know at turn it does, but does that apply to entry as well? Have a tricky situation here where we need the run to come out a ways from the entry to get some slope down then do a turn to make 12;1 going all the way down in the space that is available. Thanks! |
|
#2
|
||||
|
||||
|
LEED Green Associates Inachi US Member of the Year Award 2009 Best Home Inspector Software http://co.nachi.org/inachiawards |
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1/0 Service Entry on 200 amp Panel | mmixson | Electrical Inspections | 6 | 7/27/09 10:22 PM |
| Entry from the Garage | acassady | Interior Inspections | 10 | 6/29/09 11:13 PM |
| Continuous handrail where winders used for landing | kshepard | Interior Inspections | 3 | 7/30/07 4:45 PM |