InterNACHI


Go Back   InterNACHI Inspection Forum > General Inspection Topics > Miscellaneous Discussion for Inspectors

Notices

Miscellaneous Discussion for Inspectors Discuss whatever you wish in this forum.

 
Reply
 
LinkBack Thread Tools
  #1  
Old 12/10/07, 10:59 PM
Charley L. Bottger's Avatar
Charley L. Bottger Charley L. Bottger is offline
InterNACHI Member
 
Join Date: Apr 2004
Location: Marland, OK
Posts: 4,187
Default Delta T IR

This is an example of delta T even recording into the low to Mid 20's where most would assume that everything was the same temp as these pics were taken a few minutes ago out side my home. One was just the ice covered grass and the other was a concrete sidewalk. No I do not proclaim to be Superman but I sure like to view the different temps of different substances under the same ambient. This is just another example of why we can see the location of wall studs from the interior of a home. Delta T



Freedom Express Inspections LLC
CMOR Thermography Certified Level III #8486
freedomexpressinspections.com
www.oklahomathermalinfraredimaging.com
freedomexpress495@att.net
NACHI Member
Okla. State DEQ Environmental Phase One Certified
Master HVAC Mechanic (Retired)
Certified Universal Freon by 40CFR 82 Sub-part F
State License # 130
Serving the States of Okla, Texas, Kansas, Missouri , Arkansas and New Mexico with Commercial Inspections,Thermal Imaging

Last edited by cbottger; 5/13/08 at 10:12 PM..
Reply With Quote
  #2  
Old 12/10/07, 11:37 PM
jrivera's Avatar
jrivera jrivera is offline
Active Poster
 
Join Date: Jun 2004
Location: Shirley, NY
Posts: 1,339
Please Note: jrivera is a non-member guest and is in no way affiliated with InterNACHI or its members.
Default Re: Delta T IR

Interesting


Mic
Reply With Quote
  #3  
Old 12/11/07, 1:15 AM
John McKenna's Avatar
John McKenna John McKenna is offline
InterNACHI Member
 
Join Date: Jun 2006
Location: Crockett, Tx
Posts: 12,303
Default Re: Delta T IR

Quote:
Originally Posted by cbottger
This is just another example of why we can see the location of wall studs from the interior of a home. Delta T
What? I see wall studs from the interior of a home all the time.




John McKenna, CMI (TREC #4565)
Executive Director - Master Inspector Certification Board
25 Yrs Constr Exp - 13 Yrs Home Inspector Exp
American Home Inspection - East Texas.

Reply With Quote
  #4  
Old 12/11/07, 3:09 PM
Charley L. Bottger's Avatar
Charley L. Bottger Charley L. Bottger is offline
InterNACHI Member
 
Join Date: Apr 2004
Location: Marland, OK
Posts: 4,187
Default Re: Delta T IR

Quote:
Originally Posted by jmckenna1
What? I see wall studs from the interior of a home all the time.

Yes John I understand very well but for the un-knowing I have never observed you explaining, Why you see them that was the reason for my post.



Freedom Express Inspections LLC
CMOR Thermography Certified Level III #8486
freedomexpressinspections.com
www.oklahomathermalinfraredimaging.com
freedomexpress495@att.net
NACHI Member
Okla. State DEQ Environmental Phase One Certified
Master HVAC Mechanic (Retired)
Certified Universal Freon by 40CFR 82 Sub-part F
State License # 130
Serving the States of Okla, Texas, Kansas, Missouri , Arkansas and New Mexico with Commercial Inspections,Thermal Imaging
Reply With Quote
  #5  
Old 12/11/07, 6:47 PM
John McKenna's Avatar
John McKenna John McKenna is offline
InterNACHI Member
 
Join Date: Jun 2006
Location: Crockett, Tx
Posts: 12,303
Default Re: Delta T IR

You see them because they show a different temerature on the IR camera. I think
we have talked about the process about a dozen times... what is the point?



John McKenna, CMI (TREC #4565)
Executive Director - Master Inspector Certification Board
25 Yrs Constr Exp - 13 Yrs Home Inspector Exp
American Home Inspection - East Texas.

Reply With Quote
  #6  
Old 12/11/07, 11:12 PM
Charley L. Bottger's Avatar
Charley L. Bottger Charley L. Bottger is offline
InterNACHI Member
 
Join Date: Apr 2004
Location: Marland, OK
Posts: 4,187
Default Re: Delta T IR

Quote:
Originally Posted by jmckenna1
You see them because they show a different temerature on the IR camera. I think
we have talked about the process about a dozen times... what is the point?
The point is I just see a bit of discussion here and a bit over there never no real in depth discussion going on. I personally would like to see a thread devoted to IR as this appears to be in a lot of HI's future business.



Freedom Express Inspections LLC
CMOR Thermography Certified Level III #8486
freedomexpressinspections.com
www.oklahomathermalinfraredimaging.com
freedomexpress495@att.net
NACHI Member
Okla. State DEQ Environmental Phase One Certified
Master HVAC Mechanic (Retired)
Certified Universal Freon by 40CFR 82 Sub-part F
State License # 130
Serving the States of Okla, Texas, Kansas, Missouri , Arkansas and New Mexico with Commercial Inspections,Thermal Imaging
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to tell single from 3 phase krentz Electrical Inspections 20 7/30/07 4:07 PM
3-Phase Explained ( Commerical Electrical ) pabernathy Electrical Inspections 26 1/6/06 2:53 PM


All times are GMT -4. The time now is 11:08 AM.


Popular Sections

:

All Sections

Inspection News

InterNACHI Membership

Inspection Standards

Inspection Education

InterNACHI Inspectors

Inspection Links

 

 

 

NACHI.ORG Statistics

 

 

no new posts