Overhang

[Buck Hartley, CMI]

Would anyone call out this type of construction. The overhang is aprrox 8feet on the one end? The roof is engineered truss.

Thanks!

[Larry D. Kage]

Originally Posted by bhartley

Would anyone call out this type of construction. The overhang is aprrox 8feet on the one end? The roof is engineered truss.

Thanks!

As an engineered system, it should be fine, Buck.

Did you have a specific concern?

[Buck Hartley, CMI]

Not really, it just looks different. Whole neighborhood full of them.

[Donald T. Belmont]

If it's a engineered truss then it should be fine.

If you have access there should be a bearing point where the truss bears on the plate. If there is none I'd question if the truss was designed for the stresses involved.

[Buck Hartley, CMI]

I could not get that far into the attic.

Thanks

[Jeffrey Moore]

I'd be more concerned with the downspouts from the upper gutters
emptying onto the roof and overwhelming the lower gutter system

[Jeffrey R. Jonas]

Agree with Larry, I have no concern with this design.

[Jeffrey R. Jonas]

Originally Posted by jmoore5

I'd be more concerned with the downspouts from the upper gutters
emptying onto the roof and overwhelming the lower gutter system

Buck,

Is that the one in the other thread with the wasps?

[Buck Hartley, CMI]

Yes, Iwrote those downspouts also. There were three.

[Bruce M. Graham, III]

ditto down spouts and missing kickout flashings