Safety Glass required ?

[Bob Elliott]

The whole 200 plus units are most likely this way guys.
Does that appear to be over 9 sq feet?

[Marcel R. Cyr]

Not unless you figure both panes Bob. You didn't measure it?
The pane section would have to be 3'x3' and it don't look that big.

[Bob Elliott]

Originally Posted by mcyr

Not unless you figure both panes Bob. You didn't measure it?
The pane section would have to be 3'x3' and it don't look that big.

No but it looks like a close call.
That's why I am here with it.

[Brian E. Kelly]

Originally Posted by belliott

The whole 200 plus units are most likely this way guys.
Does that appear to be over 9 sq feet?

Can you call the guy holding the tape in the pictures, maybe he measured the glazing????

And as we are not Technically Code Inspectors Bob, you are well within your scope to recommend any Safety Upgrades you deem applicable. I would not have a problem with safety glass upgrade.

[Bob Elliott]

Originally Posted by bkelly2

Can you call the guy holding the tape in the pictures, maybe he measured the glazing????

And as we are not Technically Code Inspectors Bob, you are well within your scope to recommend any Safety Upgrades you deem applicable. I would not have a problem with safety glass upgrade.

Very good as that is what I ended up doing , but it still has me a little ...big word warning!...perplexed.