International Association of Certified Home Inspectors
|
|||||||
| Interior Inspections Contains discussions about the interior portion of a home inspection. This includes stairs, walls, floors, ceilings, smoke detectors, etc. |
![]() |
|
|
LinkBack | Thread Tools |
|
#1
|
||||
|
||||
|
Does anyone know requirements for safety glass in standard window installations. Somthing more in depth than a height standard. What are some specifics?
Infraspection Institute Level 1 Certified Infrared Thermographer Fogarty Inspection Services Group of Knoxville TN Home inspections, Commercial Inspections, Thermal Imaging, Mold, Enviromental Testing and Radon Testing for Knoxville TN, Oak Ridge TN, Maryville, Clinton, Farragut, Lenoir City, Pigeon Forge, Sevierville and all the surrounding areas. 865-256-5397 www.homeinspectorknoxville.com www.moldandradon.com www.thermal-inspection.net www.commercial-building-inspector.net |
| Need a home inspection in Pennsylvania? Check out InterNACHI's listing of Pennsylvania certified home inspectors. Or, find a home inspector anywhere in the world with our inspection search engine. |
|
#2
|
||||
|
||||
|
If he glass meets all of the following conditions, it must be safety/tempered;
9' sq ft or more exposed glazing 18" or less from the ground Top edge 3' or more above ground Within 36" of a walking surface There are many other conditions where safety/tempered glass is required. Do you have a more specific question? IF YOUR INSPECTOR IS NOT USING THERMAL IMAGING, YOU'RE NOT GETTING THE WHOLE PICTURE ® Jeff PopeJPI Home Inspection Service Santa Clarita CA (661) 212-0738 Santa Clarita Home Inspection http://www.MyInspector.net Last edited by jpope; 2/23/10 at 11:11 PM.. |
|
#3
|
|||
|
|||
|
Please Note:
grusk is a non-member guest and is in no way affiliated with InterNACHI or its members.
|
|
#4
|
||||
|
||||
|
What about these glass panels between rooms?
Seems like a potential safety concern if the glass is not tempered. I need to look more closely when I go back tomorrow. Or would you highly intelligent people be able to tell from the picture. |
|
#5
|
||||
|
||||
|
No you guy's answered my questions. I was just splitting hairs with a builder the other day about the windows. I have my answer. Thanks
Infraspection Institute Level 1 Certified Infrared Thermographer Fogarty Inspection Services Group of Knoxville TN Home inspections, Commercial Inspections, Thermal Imaging, Mold, Enviromental Testing and Radon Testing for Knoxville TN, Oak Ridge TN, Maryville, Clinton, Farragut, Lenoir City, Pigeon Forge, Sevierville and all the surrounding areas. 865-256-5397 www.homeinspectorknoxville.com www.moldandradon.com www.thermal-inspection.net www.commercial-building-inspector.net |
|
#6
|
||||
|
||||
|
I say no Dave. They appear to be more than 18" off of the floor.
IF YOUR INSPECTOR IS NOT USING THERMAL IMAGING, YOU'RE NOT GETTING THE WHOLE PICTURE ® Jeff PopeJPI Home Inspection Service Santa Clarita CA (661) 212-0738 Santa Clarita Home Inspection http://www.MyInspector.net |
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Florida Licensing Bill - Action Soon | jburkeson1 | Legislation, Licensing & Legal Issues for Inspectors | 250 | 7/1/10 4:50 PM |
| Liability question | jcahill | Legislation, Licensing & Legal Issues for Inspectors | 30 | 8/24/08 4:10 PM |
| Safety glass requirements | jlybolt | Interior Inspections | 17 | 9/13/06 11:39 PM |
| Electrical Safety Information | jtedesco1 | Electrical Inspections | 0 | 2/19/06 1:48 AM |