InterNACHI


Go Back   InterNACHI Inspection Forum > Specific Inspection Topics > Electrical Inspections

Notices

Electrical Inspections Contains discussions about electrical systems. This includes receptacles, panels, wiring, etc.

Reply
 
LinkBack Thread Tools
  #16  
Old 1/19/09, 9:51 PM
Charley L. Bottger's Avatar
Charley L. Bottger Charley L. Bottger is offline
InterNACHI Member
 
Join Date: Apr 2004
Location: Marland, OK
Posts: 3,875
Default Re: I have a problem

Quote:
Originally Posted by rromoser View Post
If this underground cable is connected directly to a transformer at the back of the yard, this cable most likely belongs to the power company. That stated the sizing of the USE cable is covered by a different code. Granted the one splice looks good but the taped up one doesn't. I would want it entirely replaced at the plumbers expense.
Another point is underground utility locaters typically don't locate private lines. So if this line is homeowner owned, they would usually have to hire an electrician to locate it.
Randall we have a service here in Ok called (call OKIE) and they will free of charge come spot all utilities for a home owner so things like this don't happen



Freedom Express Inspections LLC
CMOR Thermography Certified Level III #8486
freedomexpressinspections.com
www.oklahomathermalinfraredimaging.com
freedomexpress495@att.net
NACHI Member
Okla. State DEQ Environmental Phase One Certified
Master HVAC Mechanic (Retired)
Certified Universal Freon by 40CFR 82 Sub-part F
State License # 130
Serving the States of Okla, Texas, Kansas, Missouri , Arkansas and New Mexico with Commercial Inspections,Thermal Imaging
Reply With Quote
  #17  
Old 1/20/09, 5:25 PM
Charley L. Bottger's Avatar
Charley L. Bottger Charley L. Bottger is offline
InterNACHI Member
 
Join Date: Apr 2004
Location: Marland, OK
Posts: 3,875
Default Re: I have a problem

Up date on my problem house met with the electrical contractor this morning and he and the plumber have agreed to replace the total service with the proper amp rated feeds. His excuse for the wrong size wire was two different workers were working the job as the reason for the mistake. I let that stupid reason fly over my head and did not call him on it in front of the client. What he did not know was this was not my first Rodeo and I am getting for my client the proper sized feed wires and he got to save a little face with the client but he also does not know he will not be getting any more contract work in this housing project.

Thanks for your input



Freedom Express Inspections LLC
CMOR Thermography Certified Level III #8486
freedomexpressinspections.com
www.oklahomathermalinfraredimaging.com
freedomexpress495@att.net
NACHI Member
Okla. State DEQ Environmental Phase One Certified
Master HVAC Mechanic (Retired)
Certified Universal Freon by 40CFR 82 Sub-part F
State License # 130
Serving the States of Okla, Texas, Kansas, Missouri , Arkansas and New Mexico with Commercial Inspections,Thermal Imaging
Reply With Quote
  #18  
Old 1/20/09, 5:45 PM
David A. Andersen's Avatar
David A. Andersen David A. Andersen is offline
InterNACHI Member
 
Join Date: Jun 2005
Location: Woodlawn, TN
Posts: 5,686
Default Re: I have a problem

It don't matter how you get there, just get er done!



"Insanity: doing the same thing over and over again and expecting a different results." Albert Einstein

David A. Andersen & Associates
Clarksville - Nashville Home Inspector Lic#40
http://www.midtninspections.com
ITC Level III Thermographer Cert#1958
Building Science Thermographer Cert#33784
http://www.thermalimagingscan.com
HVAC Certification EPA Cert#2046620
BPI# 5015804
Link to my Website at: http://www.midtninspections.com/link-submission
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
furnace problem ? Aaron lore General Inspection Discussion 11 2/5/09 2:04 PM
Is MAC a problem bemelander General Inspection Discussion 2 9/6/07 12:34 PM
Camera Problem nwagner Miscellaneous Discussion for Inspectors 19 7/30/07 11:10 PM
Plumbing problem at home. mnahrgang Plumbing Inspections 25 7/10/07 6:32 PM


All times are GMT -4. The time now is 8:04 AM.


Popular Sections

:

All Sections

Inspection News

InterNACHI Membership

Inspection Standards

Inspection Education

InterNACHI Inspectors

Inspection Links

 

 

 

NACHI.ORG Statistics

 

 

no new posts