International Association of Certified Home Inspectors

Stephen L. Guardino, CMI · #1 12/4/08, 5:16 PM

http://www.nachi.org/forum/attachmen...1&d=1228425241

Anyone have any input on this pigtail installation on a new panel? The pigtail ? I have my own thoughts but like input from others.
Thanks

Greg Bell · #2 12/4/08, 5:19 PM

It is all legal as long as the pigtails are in the panel. Was this panel a upgrade?

Stephen L. Guardino, CMI · #3 12/4/08, 5:24 PM

Hi Greg,
Yes, upgraded from a Federal Pacific Stab-Lock.
Thanks for the reply. I just wanted to make sure. Sometime you get a brain fart.

Stephen L. Guardino, CMI · #4 12/4/08, 5:26 PM

Greg,
Did you get a call last week on a wind mit. inspection ?
I gave the customer your name.

Chuck Evans · #5 12/4/08, 6:02 PM

Isn't the sheathing supposed to be cut back to 1 inch? What's with the wire ties?

Stephen L. Guardino, CMI · #6 12/4/08, 7:11 PM

It looked sloppy to me.

Blaine Wiley · #7 12/5/08, 1:52 PM

Looks like a common installation by any of our area electricians that install power demand boxes.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pellet stove help	chellickson	General Inspection Discussion	23	8/19/10 2:23 AM
Grounded conductors	cduphily	Electrical Inspections	144	12/22/08 7:32 AM
Google Street View	dvalley	Miscellaneous Discussion for Inspectors	13	10/9/08 7:48 AM
September Inspection Slow Down?!?!?!....	jwatts1	Miscellaneous Discussion for Inspectors	13	9/20/07 6:47 PM
Bonding wire installation requirements ??	rnewman1	Electrical Inspections	7	7/31/06 3:31 PM

Popular Sections