InterNACHI


Go Back   InterNACHI Inspection Forum > Specific Inspection Topics > Inspecting HVAC Systems

Notices

Inspecting HVAC Systems Topics include heating, venting, and air conditioning inspections.

 
Reply
 
LinkBack Thread Tools
  #16  
Old 3/13/07, 12:17 AM
Charley L. Bottger's Avatar
Charley L. Bottger Charley L. Bottger is offline
InterNACHI Member
 
Join Date: Apr 2004
Location: Marland, OK
Posts: 4,187
Default Re: Condensate piping

[quote=Marc D. Shunk]My comments were based on the theory that any condensate snot at either of the yellow arrows would cause AC condensate to back up into the furnace. I know that it remains quite normal for both condensate drains to share common pipework. (quote)

Marc; I understand what you are saying but I most usely find cold water slim (snot) as you call it in the P-traps or the condensate pan themselves where there is water standing not flowing constantly those fittings that you are pointing to would drain dry every time the A/C shut down thus be very hard to impossible to block those lines. Anyway it should be a normal maintenance process to flush bleach down these lines a couple of times every cooling season. That is why a Tee should be installed at the outlet of the A-coil with a stand pipe and cap to allow easy bleach adding. Most present day contractors don't even think along these lines.


</IMG>



Freedom Express Inspections LLC
CMOR Thermography Certified Level III #8486
freedomexpressinspections.com
www.oklahomathermalinfraredimaging.com
freedomexpress495@att.net
NACHI Member
Okla. State DEQ Environmental Phase One Certified
Master HVAC Mechanic (Retired)
Certified Universal Freon by 40CFR 82 Sub-part F
State License # 130
Serving the States of Okla, Texas, Kansas, Missouri , Arkansas and New Mexico with Commercial Inspections,Thermal Imaging
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Do you put polybutylene in the Summary? jfunderburk Plumbing Inspections 41 4/5/12 6:43 AM
Help - Polybutylene Pipes Rick G Plumbing Inspections 39 2/12/09 8:16 AM
Bonding both hot and hold supply pipes kshepard Plumbing Inspections 22 5/4/08 8:00 AM
1 condensate line...... Scott Schultz Inspecting HVAC Systems 2 11/4/07 6:18 AM
Bonding Piping 101....Good To Know ! pabernathy Electrical Inspections 37 4/28/07 11:25 AM


All times are GMT -4. The time now is 6:48 AM.


Popular Sections

:

All Sections

Inspection News

InterNACHI Membership

Inspection Standards

Inspection Education

InterNACHI Inspectors

Inspection Links

 

 

 

NACHI.ORG Statistics

 

 

no new posts