International Association of Certified Home Inspectors
|
|||||||
| Inspecting HVAC Systems Topics include heating, venting, and air conditioning inspections. |
![]() |
|
|
LinkBack | Thread Tools |
|
#1
|
|||
|
|||
|
This photo was taken looking up between joists of main floor. The black metal item appears to extend to the exterior (although I could not confirm that due to new construction). I don't know if it belongs in this forum or not.
Thanks, Peter Last edited by pwigle; 11/28/07 at 1:31 PM.. |
|
#2
|
|||
|
|||
|
Peter
By chance is this shroud looking part "vented" to the outside? Is it located under the Kitchen area, say under the cooktop or range, either in line with the cabinetry or under an island? Offhand it looks like a sidewall direct vent for some kind of downdraft exhaust system. Picture isn't real clear, nothing to compare too, or help with dimensional comparison, but it does resemble what I've seen. |
|
#3
|
||||
|
||||
|
Looks like the end of an old expansion tank.
|
|
#4
|
|||
|
|||
|
Home made combustion air opening?
InterNachi Awards Portal: http://co.nachi.org/inachiawards/ ____________________________________________ "An Education, not just an Inspection" Larry Kage, CMI Lake Ann (Traverse City), Michigan 49650 231 929 3525 Professional Inspector serving the Traverse City, Michigan area and beyond.
|
|
#5
|
|||
|
|||
|
I think Greg might have it. It is about the right size and location. And the shape does imply a fan housing, with the inlet at the top. The stove is currently at an interior wall, and there is original galvanized ducting in the attic above the stove but who knows what might have been at one time. No doubt an exhaust from the floor above. Thanks.
|
![]() |
| Thread Tools | |
|
|