InterNACHI


Go Back   InterNACHI Inspection Forum > Specific Inspection Topics > Inspecting HVAC Systems

Notices

Inspecting HVAC Systems Topics include heating, venting, and air conditioning inspections.

Reply
 
LinkBack Thread Tools
  #1  
Old 7/11/06, 10:53 AM
pcarter-old-04's Avatar
pcarter-old-04 pcarter-old-04 is offline
Active Poster
 
Join Date: Oct 2004
Posts: 426
Please Note: pcarter-old-04 is a non-member guest and is in no way affiliated with InterNACHI or its members.
Default Need help with Date of MFG

I need help getting a Date of MFG on a Coleman-Evcon Forced Air Furnace and a MFG and Date of MFG on a A/C unit that on the label that says distributed by Unitary Products Group
5005 York Drive
Norman, OK

Forced Air Furnace Info:
Model #: G8V10016UHB11C
S/N: WBMM000289
Need Date of MFG.

A/C Unit:
Model #: HATC-F048SA
S/N: WNLMO19929
Need Mfg and date of Mfg if possible.

Thanks in advance for your help and assistance.
Reply With Quote
  #2  
Old 7/11/06, 7:36 PM
Robert J. OConnor's Avatar
Robert J. OConnor Robert J. OConnor is offline
InterNACHI Member
 
Join Date: Jul 2003
Location: Long Island, NY
Posts: 1,288
Default Re: Need help with Date of MFG

Try this post ...

http://www.nachi.org/forum/showpost....79&postcount=3



Robert O'Connor, PE
Consulting Engineer & Inspector
LIU CW Post Adjunct Professor
NACHI Education Committee
www.reporthost.com/-rjo

I am absolutely amazed sometimes by how much thought goes into doing things wrong ...
Reply With Quote
  #3  
Old 7/12/06, 7:05 AM
Russel Ray's Avatar
Russel Ray Russel Ray is offline
InterNACHI Member
 
Join Date: Mar 2003
Location: La Mesa, CA
Posts: 16,559
Default Re: Need help with Date of MFG

Unitary Products Group is York-Borg Warner, or vice versa as the case may be.

The serial numbers for both of the units appear to be standard Unitary Products Group/York-Borg Warner coding. Is the forced air furnace, then, Coleman-Evcon?

Coleman-Evcon seems to be a difficult one to code.

I would guess on those two units that the furnace is 1982 (the third letter, M) and the A/C is 1981 (the third letter, L).



NACHI 2005 U.S. Member of the Year
Reply With Quote
  #4  
Old 7/12/06, 9:16 AM
pcarter-old-04's Avatar
pcarter-old-04 pcarter-old-04 is offline
Active Poster
 
Join Date: Oct 2004
Posts: 426
Please Note: pcarter-old-04 is a non-member guest and is in no way affiliated with InterNACHI or its members.
Default Re: Need help with Date of MFG

RR

When I ran the model number's against the prestons guide neither showed up. The guide goes from 2000 and back. I verified the numbers and they are accurate. I was pretty busy yesterday and didnt get a chance to call Coleman, since thier HQ is in Wichita, but will try and call them today after my morning inspection is done. The document Robert pointed me to, I already have and it didnt make any sense regarding the Coleman or the A/C no matter how I decripered the numbers. As soon as I find out anything I will post. Regarding the HVAC document, its been on the money for other HVAC equipment, just not these units, thats why I posted.
Reply With Quote
  #5  
Old 7/12/06, 5:51 PM
Robert J. OConnor's Avatar
Robert J. OConnor Robert J. OConnor is offline
InterNACHI Member
 
Join Date: Jul 2003
Location: Long Island, NY
Posts: 1,288
Default Re: Need help with Date of MFG

Coleman typically uses the first four digits in the S/N to designate the year and date of manufacture, so my guess would be ...

Furnace S/N: aaaa0002xx ... February 2000

A/C Unit S/N: aaaaO199xx ... January 1999

Older units reportedly have the first four numbers designating the Month-Year, and then at some point they switched to the more universal system of the first four numbers designating the Year-Month. Perhaps they made that switch in April 1999 (and not April 1992 as indicated in the post I linked) due to the upcoming month/week and year similarities (like January 2001).

Would be good to have better info on the date coding if ya get that.



Robert O'Connor, PE
Consulting Engineer & Inspector
LIU CW Post Adjunct Professor
NACHI Education Committee
www.reporthost.com/-rjo

I am absolutely amazed sometimes by how much thought goes into doing things wrong ...

Last edited by roconnor; 7/12/06 at 9:36 PM..
Reply With Quote
  #6  
Old 3/16/11, 11:15 PM
Darin Redding's Avatar
Darin Redding Darin Redding is offline
InterNACHI Member
 
Join Date: Jan 2010
Location: San Diego, CA
Posts: 447
Default Re: Need help with Date of MFG

I've got a Borg Warner in a condo built in 1986, looks original, serial MMMM143922 and model p2csd08n065018. Can't make heads or tails of the date.

Any help appreciated.



Darin Redding, CPI
Housecall Property Inspections
san diego home inspection
rental inspection | warranty inspection
Facebook Like
darin@sandiegohomeinspect.com
619-663-8740
home inspector in San Diego, Carlsbad, Poway, La Mesa, El Cajon, Chula Vista.
Reply With Quote
  #7  
Old 3/16/11, 11:25 PM
James H. Bushart's Avatar
James H. Bushart James H. Bushart is offline
InterNACHI Member
 
Join Date: Dec 2004
Location: Southwest Missouri
Posts: 20,490
Default Re: Need help with Date of MFG

Quote:
Originally Posted by dredding View Post
I've got a Borg Warner in a condo built in 1986, looks original, serial MMMM143922 and model p2csd08n065018. Can't make heads or tails of the date.

Any help appreciated.
1984 or 1985, per Preston



James H. Bushart

Professional Building Analyst, BPI
Missouri, Kansas and Arkansas
314-803-2167
Inspecting in Aurora, Branson, Carthage, Granby, Joplin, Kimberling City, Monett, Mount Vernon, Neosho, Nixa, Purdy, Reed Spring, Republic, Springfield and surrounding areas.

Reply With Quote
  #8  
Old 3/16/11, 11:45 PM
Darin Redding's Avatar
Darin Redding Darin Redding is offline
InterNACHI Member
 
Join Date: Jan 2010
Location: San Diego, CA
Posts: 447
Default Re: Need help with Date of MFG

Thanks Gents.



Darin Redding, CPI
Housecall Property Inspections
san diego home inspection
rental inspection | warranty inspection
Facebook Like
darin@sandiegohomeinspect.com
619-663-8740
home inspector in San Diego, Carlsbad, Poway, La Mesa, El Cajon, Chula Vista.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ASTM meeting date and venue confirmed. Everyone welcome. gromicko Miscellaneous Discussion for Inspectors 8 8/20/07 4:06 PM


All times are GMT -4. The time now is 9:45 AM.


Popular Sections

:

All Sections

Inspection News

InterNACHI Membership

Inspection Standards

Inspection Education

InterNACHI Inspectors

Inspection Links

 

 

 

NACHI.ORG Statistics

 

 

no new posts