InterNACHI


Go Back   InterNACHI Inspection Forum > Specific Inspection Topics > Inspecting HVAC Systems

Notices

Inspecting HVAC Systems Topics include heating, venting, and air conditioning inspections.

Reply
 
LinkBack Thread Tools
  #1  
Old 11/14/07, 7:16 PM
bmargiotti bmargiotti is offline
New User
 
Join Date: Feb 2005
Location: Berea, OH
Posts: 66
Please Note: bmargiotti is a non-member guest and is in no way affiliated with InterNACHI or its members.
Default Venting Materials question

i see quite often when two appliances are venting into the same chimney that the furnace is vented above the H20 tank. are you guys writing this up as a potential safety risk and that they might not vent properly? i am, but am getting nasty looks from realtors!

Reply With Quote
  #2  
Old 11/14/07, 8:34 PM
Jeffrey R. Pope's Avatar
Jeffrey R. Pope Jeffrey R. Pope is offline
InterNACHI Member
 
Join Date: Aug 2003
Location: Santa Clarita, CA
Posts: 7,760
Default Re: Venting Materials question

How is this a safety issue?



IF YOUR INSPECTOR IS NOT USING THERMAL IMAGING, YOU'RE NOT GETTING THE WHOLE PICTURE ®
Jeff Pope
JPI Home Inspection Service
Santa Clarita CA
(661) 212-0738
Santa Clarita Home Inspection
http://www.MyInspector.net


Reply With Quote
  #3  
Old 11/14/07, 9:08 PM
David P. Valley's Avatar
David P. Valley David P. Valley is offline
InterNACHI Member
 
Join Date: Jun 2003
Location: METHUEN, MA
Posts: 8,684
Default Re: Venting Materials question

I see the vent penetration as too close to combustibles and as long as the upper vent is smaller than the lower vent, the venting situation is fine.

venting-materials-question-vent-2applian.jpg
Reply With Quote
  #4  
Old 11/14/07, 11:22 PM
bmargiotti bmargiotti is offline
New User
 
Join Date: Feb 2005
Location: Berea, OH
Posts: 66
Please Note: bmargiotti is a non-member guest and is in no way affiliated with InterNACHI or its members.
Default Re: Venting Materials question

i guess this picture isnt that great but the lower vent was smaller
Reply With Quote
  #5  
Old 11/15/07, 6:08 AM
David P. Valley's Avatar
David P. Valley David P. Valley is offline
InterNACHI Member
 
Join Date: Jun 2003
Location: METHUEN, MA
Posts: 8,684
Default Re: Venting Materials question

Quote:
Originally Posted by bmargiotti
i guess this picture isnt that great but the lower vent was smaller
Then I'd call it out as such. "See my diagram above".
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Venting Question dmacy Inspecting HVAC Systems 4 8/30/07 8:33 PM
Moisture control for slab on grade in protecting floor finishes mcyr General Inspection Discussion 2 8/13/07 8:53 PM
Island sink venting question ehyde Plumbing Inspections 4 7/13/07 2:36 AM
Basement Bathroom Venting Question Sean M. Jeric Plumbing Inspections 4 3/21/07 12:56 AM
Venting question bsmith Inspecting HVAC Systems 6 2/14/06 8:14 AM


All times are GMT -4. The time now is 8:56 AM.


Popular Sections

:

All Sections

Inspection News

InterNACHI Membership

Inspection Standards

Inspection Education

InterNACHI Inspectors

Inspection Links

 

 

 

NACHI.ORG Statistics

 

 

no new posts