How long do pool heaters last?

[Larry D. Kage]

My father-in-law's gas one is kaput and is only 6 years old. I know nothing about pool heaters. Is that the norm?

What brands are more durable? How much do they cost in Florida? Is it best to cover the heaters when not in use?

Any information is appreciated.

Thanks.

[Barry Adair]

info

my experience, most pool equipment has about a 10 year life span this will of course vary on installation, type, use and geo. location

if he's in FL close to ocean 6 yrs. would be great, imo

hth

[Larry D. Kage]

Thanks Barry...I'll read that tomorrow.

They're coming to put a new one in the AM.

I just want to at least know a little when I hear 'em talking.

[Russell J. Hensel]

They will try to sell you titanium pool heater, they say it lasts longer, but I do not find that here. The biggest culprit is that the heaters are seldom used. You have to exercise these items often. If its a gas heater why can it not be repaired?

They should have sheets explain each heater and its typical annual operating cost. Sometimes spending a few bucks makes up for it in gas consumption. GET MULTIPLE BIDS......

[Russel Ray]

I'm also perplexed as to why it cannot be repaired.

Out here we can get them to last 30-40 years. The oldest still-going-strong one I've found out here was 43 years old.

In Texas, not so much. Lucky if they made it 10 years.

[Larry D. Kage]

Well, the way it was explained to me, the heat exchanger is rusted out, the heater fan is shot and a couple of other things. Like I said, I have no experience with pools or their heaters so I appreciate any input.

The unit is a:

Teledyne Laars LX
Mod. LX400P
Ser. A99L10250
Propane gas
78% efficient



Does the "99" in the serial number mean it is a 1999 model?


Thanks.

[Joe Funderburk, CMI]

Take the manufacturer's warranty, and add one day to it. That's when it will fail.

[David A. Andersen]

Larry, are there pool chemicals stored in the area of the heater?

That will kill it ASAP.

Can also make it blow up!

[Russell J. Hensel]

Appears to be a 1999. Ask them to SHOW you the rusted out parts and why can't they just be replaced? A fan is about $100 and the cost of the other items cannot be that high. I just hate it when one thing goes they want to sell you another heater.

[David A. Andersen]

Bad heat exchanger will be leaking water all over the place.

Rusted? Aren't they all rusted?

[Larry D. Kage]

Originally Posted by dandersen

Larry, are there pool chemicals stored in the area of the heater?

That will kill it ASAP.

Can also make it blow up!

Hi David.

No the chemicals are not stored in that area at all.

[Larry D. Kage]

Originally Posted by rhensel

Appears to be a 1999. Ask them to SHOW you the rusted out parts and why can't they just be replaced? A fan is about $100 and the cost of the other items cannot be that high. I just hate it when one thing goes they want to sell you another heater.

A little dripping but substantial pile of rust below the exchanger.

Estimate was 1500 to 1800 for repairs...new unit 2500.

[David A. Andersen]

I would go new, heat exchanger repair can be $$$.

[Barry Adair]

that's a rip and run for about $500 tech fee...2 hrs. max
http://discount-pool.com/product_inf...roducts_id=623

i'll do it, today only! for $300 + travel

[Larry D. Kage]

Originally Posted by badair

that's a rip and run for about $500 tech fee...2 hrs. max
http://discount-pool.com/product_inf...roducts_id=623

i'll do it, today only! for $300 + travel

I'm not following you Barry.

Your link puts the cost for the unit at $2,199.00 so $300.00 labor to total the $2,500 estimate seems reasonable.

What am I missing?