International Association of Certified Home Inspectors
|
|||||||
| Structural Inspections Contains discussions about the structural portion of a home inspection. This includes foundations, framing, etc. |
![]() |
|
|
LinkBack | Thread Tools |
|
#1
|
||||
|
||||
|
Are these rotatable plates intended to be used to extend a truss top chord?
This type of plate is used at the ridge on the same house where it makes approx a 40 deg angle. I found some other truss issues so calling for an engineer is a given, just wanting some more info/link on this application. B.A. King Home Inspections, LLC www.BAKingHomeInspections.com Serving Charlotte NC area and Rock Hill SC areas. CMI Certified Master Inspector and Independent License NC2449 and SC1597 704 301-3207 "Discovery consists in seeing what everyone else has seen and thinking what no one else has thought." - Albert Szent-Gyvrgyi, Nobel Prize for Medicine 1937 |
| Find an InterNACHI certified Iowa Home Inspector (and anywhere else in North America) |
|
#2
|
||||
|
||||
|
http://www.schererbros.com/products/mitek/index.php
http://www.icc-es.org/reports/pdf_fi...S/ESR-1397.pdf You can argue with intelligent people but to argue with a mush head is like trying to grab fog-Thomas Sowell Last edited by mlarson; 4/29/09 at 6:14 PM.. |
|
#3
|
||||
|
||||
|
Hi Bruce,
That is a very common fitting on manufactured housing units. Regards Gerry "To realize our true destiny, we must be guided not by a myth from our past, but by a vision of our future." (Mark B Adams) Commercial property Inspection Tampa, Orlando, Sarasota, Jacksonville, Ft Launderdale, Miami, Florida. NACHI cell 484-429-5466 NACHI02121106 |
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| cut floor joice | John E. Gibson, #2 | General Inspection Discussion | 16 | 9/25/08 9:45 PM |
| Truss Uplift | rcooke | Canadian Inspectors | 5 | 2/26/08 7:43 PM |