Leaning tower of pier!

[cmccann]

Leaning tower of pier, and cracked floor joist.

[Jay Moge]

boy it's a good thing they had all those blocks there to catch the house when it dropped.

[Russel Ray]

You've got the leaning towers, I've got the boats:

[Russel Ray]

Here's five of my best foundation pictures from past inspections.

I seem to run into interesting foundations as often as Jeff runs into really, really bad Zinsco electric panels.

[rwand1]

.... And no it does not need the review of an engineer! It requires rebuilding/replacement for the leaning concrete blocks. Their is nothing wrong with CMU as long as they are placed on thier sides, not as in the photo.

Raymond Wand
Alton, ON

[Russel Ray]

Depending on their use. I'm not sure I would want to attempt to do the engineering calculations for CMU stacks supporting a house. CMU has its place, just not as loose foundation components.

[rwand1]

Raymond Wand
Alton, ON

[Marcel R. Cyr]

Hey Raymond;

I know what the bearing capacities are for lumber, and with all stability and lateral stability aside, would you think anyone knew of the load capacity of the soil was for this 2x6 footer.??? ha. ha.

Marcel

[Kenton H. Shepard, CMI]

Man, I see this stuff all the time up in these little mountain cabins. The further back from the road you get, the worse the floor supports get because they always undersized and overspanned the joists way back when.
But you know, as long as the crawlspace stays dry, they'll stay that way for a long, long time with no problem. Sure freaks people out though.
-Kent

[apfaff]

Originally Posted by kshepard

Man, I see this stuff all the time up in these little mountain cabins. The further back from the road you get, the worse the floor supports get.......

I hear ya!

In Wisconsin it is lake homes, and of course rural vacation homes. The thing that always amazes me is how much people remodel and expand on these cabins when the population grows in the area, and they are converted to year-round homes.

[ngifford]

A few more for good measure.Attachment 773

Attachment 774