International Association of Certified Home Inspectors
|
|||||||
| Structural Inspections Contains discussions about the structural portion of a home inspection. This includes foundations, framing, etc. |
![]() |
|
|
LinkBack | Thread Tools |
|
#1
|
||||
|
||||
|
The cut ends of the rafters should come in contact with the entire ridge board. Correct?
What I need is supporting evidence/documentation.
. HyTek Home Inspections & InfraRed Imaging Services Kokomo Home Inspection Lafayette Property Inspection Logansport Home Inspection Noblesville Home Inspection Last edited by jhorton1; 3/18/13 at 10:44 PM.. |
| Need a home inspection in Montana? Check out InterNACHI's listing of Montana certified home inspectors. Or, find a home inspector anywhere in the world with our inspection search engine. |
|
#2
|
||||
|
||||
|
You are correct ... Full bearing on the ridge board is required.
John |
|
#3
|
||||
|
||||
|
Quote:
Ridge board full depth of Rafter Joe Keresztury JWK Inspections Home Inspections in San Antonio, Schertz, Cibolo, New Braunfels, Boerne and all surrounding South Texas areas www.jwkhomeinspections.com |
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Nailing Ridge to rafters | Oscar Garcia | Structural Inspections | 7 | 11/17/10 7:25 AM |
| Closing Gable Vent | Kevin Patteri | General Inspection Discussion | 26 | 11/8/10 10:30 AM |
| Missing Ridge Board | pdickerson | Structural Inspections | 19 | 9/21/07 9:33 AM |
| Rafters not meeting ridge board.... | pabernathy | Structural Inspections | 20 | 2/8/06 7:32 AM |