Question about tools

[Mazyar Esmaeiliyan]

Hello to every body?
I would like to know which type of car is suitable for home inspection and from where I can buy my tools.

Thanks

[Wayne B. Wilson]

i get most of my tools here
http://www.toolexperts.com/

[Wayne B. Wilson]

i drive a pickup with a cap
depends what your carrying in ladders and so on for a transportation

[Wayne B. Wilson]

http://www.professionalequipment.com...=pe091202-pros
another source of tools

[Mazyar Esmaeiliyan]

Thanks wayne. It was helpful.

[gmelien]

Does anyone know of any good Canadian websites selling inspection tools. Those site you listed Wayne have great prices, but after exchange and duty, it wouldn't be worth the expense. I haven't found any Canadian sites selling stuff yet; but I haven't search all to hard either.

[Wayne B. Wilson]

Greg try you local Marshals ( heat And Air) or Frontier. Unless they went out of business , i haven't back for about 12 years

[Russell J. Hensel]

Sounds like a good business to get into....

[Joe Funderburk, CMI]

Originally Posted by mesmaeiliyan

Hello to every body?
I would like to know which type of car is suitable for home inspection and from where I can buy my tools.

Thanks

I don't live in Canada and therefore can't answer this question.

[gmelien]

Originally Posted by wwilson3

Greg try you local Marshals ( heat And Air) or Frontier. Unless they went out of business , i haven't back for about 12 years

Thanks Wayne, I'll try looking for those two.

[Nick Gromicko]

www.inspectoroutlet.com ships to Canada.

[John Allingham]

Originally Posted by mesmaeiliyan

Hello to every body?
I would like to know which type of car is suitable for home inspection and from where I can buy my tools.

Thanks

Your car question answered here:
http://www.nachi.org/forum/f11/poll-646-a.html

[gmelien]

Originally Posted by gromicko

www.inspectoroutlet.com ships to Canada.

Went and checked it out! Wow, that sounds like a good deal with all the perks that come along with it! Still wondering what duty will be on an the IR cam though. Any one here ever buy the Fluke TiR Thermal Imager
from the www.inspectoroutlet.com

[Vern Mitchinson]

Don't forget our InterNACHI mall

http://www.nachi.org/mall.htm

[Vern Mitchinson]

http://www.electrophysics.on.ca/e_index.htm for moisture meters model
Model CT858 or Model CT808 Reads0 to 99% and can be calabrated for different materials such as concrete and tile which is what I have mine set at.

I have used the 808 four five or six years. good machine and good service.

I also use a SGA91A Kane-may CARBON MONOXIDE ANALYZER

For local suppliers go to,

Mukhtar Malawiya

Service Manager

UEi (CANADA)
#150 - 13571 Verdun Place
Richmond, BC
V6V 1W5
604-278-4511 / 1-877-475-0648
Fax: 604-278-8299
mukhtarm@ueitest.com
www.kane.co.uk