International Association of Certified Home Inspectors
|
|||||||
| CMI/MICB Discussion This forum is for discussion of the Certified Master Inspector designation and the Master Inspector Certification Board. |
![]() |
|
|
LinkBack | Thread Tools |
|
#16
|
||||
|
||||
|
Quote:
Henry Valenzano CMI (Hank) Double Check Home Inspection LLC. http://www.conservweb.com/forum/ www.DCHI.com Hank@DCHI.com 719-635-6425 |
|
#17
|
||||
|
||||
|
Quote:
I sent you an email and will be in touch. Thanks. John McKenna, CMI
Executive Director - Master Inspector Certification Board Inspector - Instructor - Thermographer (TREC #4565) 25 Yrs Constr Exp - 11 Yrs Home Inspector Exp American Home Inspection - East Texas. |
|
#18
|
||||
|
||||
|
Thanks, greatly appreciated.
Inspection Support Services Inc. "It is not the strongest of the species that survives nor the most intelligent, but the one most responsive to change." -Charles Darwin |
|
#19
|
||||
|
||||
|
Please Note:
whandley is a non-member guest and is in no way affiliated with InterNACHI or its members.
Quote:
I'm not sure what all of this is about, but you might post this information and or request over on the CMI board at: http://www.certifiedmaster.com/forum/index.php It will not doubt get more specific attention that your looking for over there. Posting about CMI issues here at NACHI seems to attract a lot of negative responses. Since Mr. Rowan is no longer in charge of CMI, that may have had an impact on your access to CMI. You'll need to re-register and then address any vendor issues with CMI management. All of this is just my opinion of course... I hold no CMI office, nor have any official capacity at CMI... I'm just a very happy and successful NACHI and CMI member.... |
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| For those in favor of licensing | gbeaumont | Legislation, Licensing & Legal Issues | 70 | 5/21/07 4:09 PM |
| Tidbits from the ASHI Message Board | jbushart | Misc. Discussion | 124 | 4/27/07 12:05 PM |