InterNACHI


Go Back   InterNACHI Inspection Forum > Specific Inspection Topics > Thermal Imaging, Infrared Cameras & Energy Audits

Notices

Thermal Imaging, Infrared Cameras & Energy Audits Contains discussions about thermal imaging, infrared cameras, energy audits, and more.

 
Reply
 
LinkBack Thread Tools
  #1  
Old 9/30/10, 6:59 PM
Philippe G. Heller's Avatar
Philippe G. Heller Philippe G. Heller is offline
InterNACHI Member
 
Join Date: Dec 2005
Location: San Diego, CA
Posts: 171
Default Electric Load

Does anyone create a load on circuits before performing a thermal inspections? This can be difficult in a vacant home. If there is no load, you won't see over-heating.

Ideas?



Philippe Heller
The San Diego Real Estate Inspection Co.
http://www.sdinspections.com
www.facebook.com/sdinspections
Reply With Quote
Need a home inspection in South Carolina? Check out InterNACHI's listing of South Carolina certified home inspectors. Or, find a home inspector anywhere in the world with our inspection search engine.
  #2  
Old 9/30/10, 7:15 PM
Gary T. Heller's Avatar
Gary T. Heller Gary T. Heller is offline
InterNACHI Member
 
Join Date: Jan 2007
Location: Peoria, AZ
Posts: 461
Default Re: Electric Load

Yes...on the a/c, oven, range and pool pump if there is one.
Reply With Quote
  #3  
Old 9/30/10, 7:25 PM
Philippe G. Heller's Avatar
Philippe G. Heller Philippe G. Heller is offline
InterNACHI Member
 
Join Date: Dec 2005
Location: San Diego, CA
Posts: 171
Default Re: Electric Load

I was thinking of bringing a small 1500 watt (110v) space heater. This could put a load on the circuit, but also be used to create a thermal change in an isolated area. A lot of bathrooms here don't have heating vents in the bathrooms. On a cold day it is hard to get the delta T needed to observed possible moist areas.



Philippe Heller
The San Diego Real Estate Inspection Co.
http://www.sdinspections.com
www.facebook.com/sdinspections
Reply With Quote
  #4  
Old 9/30/10, 8:27 PM
Charley L. Bottger's Avatar
Charley L. Bottger Charley L. Bottger is offline
InterNACHI Member
 
Join Date: Apr 2004
Location: Marland, OK
Posts: 4,187
Default Re: Electric Load

Quote:
Originally Posted by pheller View Post
Does anyone create a load on circuits before performing a thermal inspections? This can be difficult in a vacant home. If there is no load, you won't see over-heating.

Ideas?
I been doing it for along time very easy on a vacant home with just the built in's provided there is a electric range dishwasher A/C light circuits bathroom exhaust/heaters it really gets good with more than one A/c and duel ovens with remote cooktop



Freedom Express Inspections LLC
CMOR Thermography Certified Level III #8486
freedomexpressinspections.com
www.oklahomathermalinfraredimaging.com
freedomexpress495@att.net
NACHI Member
Okla. State DEQ Environmental Phase One Certified
Master HVAC Mechanic (Retired)
Certified Universal Freon by 40CFR 82 Sub-part F
State License # 130
Serving the States of Okla, Texas, Kansas, Missouri , Arkansas and New Mexico with Commercial Inspections,Thermal Imaging
Reply With Quote
  #5  
Old 9/30/10, 8:46 PM
John McKenna's Avatar
John McKenna John McKenna is offline
InterNACHI Member
 
Join Date: Jun 2006
Location: Crockett, Tx
Posts: 12,303
Default Re: Electric Load

Charley is right again.



John McKenna, CMI (TREC #4565)
Executive Director - Master Inspector Certification Board
25 Yrs Constr Exp - 13 Yrs Home Inspector Exp
American Home Inspection - East Texas.

Reply With Quote
  #6  
Old 10/1/10, 12:59 AM
Chuck Evans's Avatar
Chuck Evans Chuck Evans is offline
InterNACHI Member
 
Join Date: Sep 2006
Location: Stagecoach, TX
Posts: 2,037
Default Re: Electric Load

First thing I do when I get to a house is crank up the ACs, ovens, dishwasher, spa tub, all the lights, fans, dryer (if it goes with the house), you name it. Get that meter spinning.



Chuck Evans (TREC #7657)
Level III Infraspection Institute Certified Infrared Thermographer (#8402)
HomeCert Houston Home Inspections & Thermal Inspections Find us on Facebook
Houston Thermal Inspections & Infrared Imaging Find us on Facebook
Houston Home Inspector

Houston, TX
Reply With Quote
  #7  
Old 10/1/10, 7:42 AM
cboyd cboyd is offline
Active Poster
 
Join Date: Jul 2007
Location: North Augusta, On
Posts: 451
Please Note: cboyd is a non-member guest and is in no way affiliated with InterNACHI or its members.
Default Re: Electric Load

Quote:
Originally Posted by cevans View Post
First thing I do when I get to a house is crank up the ACs, ovens, dishwasher, spa tub, all the lights, fans, dryer (if it goes with the house), you name it. Get that meter spinning.
I should take my 15 year old daughter on inspections, sounds just like what she does every day except she never turns them off..
Reply With Quote
  #8  
Old 10/1/10, 8:17 PM
Chuck Evans's Avatar
Chuck Evans Chuck Evans is offline
InterNACHI Member
 
Join Date: Sep 2006
Location: Stagecoach, TX
Posts: 2,037
Default Re: Electric Load

Quote:
Originally Posted by cboyd View Post
I should take my 15 year old daughter on inspections, sounds just like what she does every day except she never turns them off..
Funny... That's what I tell my clients: "I'm going to make like a teenager and turn everything in the house on."



Chuck Evans (TREC #7657)
Level III Infraspection Institute Certified Infrared Thermographer (#8402)
HomeCert Houston Home Inspections & Thermal Inspections Find us on Facebook
Houston Thermal Inspections & Infrared Imaging Find us on Facebook
Houston Home Inspector

Houston, TX
Reply With Quote
  #9  
Old 10/3/10, 1:01 PM
Peter W. Bennett Peter W. Bennett is offline
InterNACHI Member
 
Join Date: Mar 2005
Location: Little Silver, NJ
Posts: 546
Default Re: Electric Load

And be an adult and turn everything off!
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help. What is the correct way to report a breaker that is too big. gromicko Electrical Inspections 77 5/10/12 6:13 PM
"UFER" Ground? see last paragraph. jtedesco1 Electrical Inspections 19 8/23/11 3:56 PM
Electrical Safety Media Center jtedesco1 Electrical Inspections 1 3/15/08 8:18 AM
Where do I put the Aquarium? mcyr Structural Inspections 3 11/6/07 3:05 PM


All times are GMT -4. The time now is 7:23 PM.


Popular Sections

:

All Sections

Inspection News

InterNACHI Membership

Inspection Standards

Inspection Education

InterNACHI Inspectors

Inspection Links

 

 

 

NACHI.ORG Statistics

 

 

no new posts