Flir B Cam Problem

[Rodney Misener]

Hey folks,

I have a Flir BCam which was bought used for a very very good deal from someone who was getting out of the business. The problem I have with it is that it takes blurry pictures. It is almost like the focus will not adjust enough to get a clear infrared image. I am thinking the lens is no good anymore, but does anyone have any suggestions?

[John McKenna]

Post some pictures?

Have you rubbed the lense with any type of cleaner?

How are you processing your IR photos into your computer?

Are you using any software to load the photos or resize them?

Has the image degraded since you owned it? or... always poor since you owned it?

Have you shown your camera to a local FLIR Rep in your area?

Each answer might help isolate some possible issues.

[Rodney Misener]

Originally Posted by jmckenna1

Post some pictures?
[COLOR="rgb(46, 139, 87)"]I don't have any pics , they are at the office.[/COLOR]

Have you rubbed the lense with any type of cleaner?
Nope, didn't hurt the lens

How are you processing your IR photos into your computer?
]I upload them from the SD card in the camera.
Are you using any software to load the photos or resize them?
Resizing does not help the focus any.
Has the image degraded since you owned it? or... always poor since you owned it?It has been poor since i owned it, suspect the previous owner did not care for it properly.

Have you shown your camera to a local FLIR Rep in your area?
]Nearest rep is 2 hrs away, and tends to be pretty useless to be honest.

Each answer might help isolate some possible issues.

I think i'm going to end up sending it to Flir, but was looking for some possible suggestions as to what may be wrong with it. Do you think it could just need calibration? I'm not sure if that will effect image quality or not.