International Association of Certified Home Inspectors
|
|||||||
| Thermal Imaging, Infrared Cameras & Energy Audits Contains discussions about thermal imaging, infrared cameras, energy audits, and more. |
![]() |
|
|
LinkBack | Thread Tools |
|
#1
|
||||
|
||||
|
Hot Wire... ouch.
John McKenna, CMI (TREC #4565)
Executive Director - Master Inspector Certification Board 25 Yrs Constr Exp - 13 Yrs Home Inspector Exp American Home Inspection - East Texas. |
|
#2
|
||||
|
||||
|
John does it look familiar I took your image and thermally tune it to make it appear even hotter
Changed the palette and adjusted the span some more, Your image indicated 150 degrees with your setting on your camera in the hottest section of the right wire. I changed your E valve and the T reflected adjusted the span and got a 15 degree temp rise just playing around with it. BTW for those that had not thought of it would be wise if using an infrared image in a legal document to make it PDF so one with FLIR software can not change your image as I did to Johns Freedom Express Inspections LLC CMOR Thermography Certified Level III #8486 freedomexpressinspections.com www.oklahomathermalinfraredimaging.com freedomexpress495@att.net NACHI Member Okla. State DEQ Environmental Phase One Certified Master HVAC Mechanic (Retired) Certified Universal Freon by 40CFR 82 Sub-part F State License # 130 Serving the States of Okla, Texas, Kansas, Missouri , Arkansas and New Mexico with Commercial Inspections,Thermal Imaging Last edited by cbottger; 5/22/08 at 12:38 AM.. |
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| "UFER" Ground? see last paragraph. | jtedesco1 | Electrical Inspections | 19 | 8/23/11 4:56 PM |
| What's this video worth? | jtedesco1 | Inspection Education & Training | 5 | 4/18/08 10:24 AM |
| Nice Report on AL Wire Terminations - Enjoy | pabernathy | Electrical Inspections | 0 | 7/2/07 1:35 PM |
| Proper Marr Connectors for Aluminum Pigtails | jskrypka | Canadian Inspectors | 4 | 3/25/07 11:41 PM |
| Bare wire on old dryer or stove circuit: neutral or ground? | fbartlo | Electrical Inspections | 9 | 8/28/06 2:08 AM |