Thermal Imaging Camera Recommendations

[Engineer Joe]

I've scoured the web and seen different thermal imaging cameras, but most of the terminology was over my head. I'm not a home inspector. I'm actually a Commissioning Agent for a consulting firm. We're looking into purchasing a high quality TI camera for inspecting building envelopes as well as troubleshooting HVAC problems (mostly Duct and Hydronics). I was wondering if anyone had any recommendations as far as where to start, who to ask, etc. I also expect for there to be some time spent on training. Can anyone direct me towards some good cameras or someone i could consult about what we should purchase and obtaining training on the camera? I just really need to get pointed in the right direction. While cost is a consideration, I'm willing to drop more dough on a camera if it substantially out-performs others. We will be inspecting large facilities and so we'll need something with high quality images as well as a large capacity. We've put aside some funding for this, so we're just looking for the best option (before the expenses offer diminishing returns, of course).

[John McKenna]

Please consider this...

http://www.infrared-certified.com

Contact me for more info

john@infrared-certified.com
888-818-4838

[David A. Andersen]

Consider me to do the work for you!
Save time and money!

If you commission buildings, you have enough to do!

[OJ Utter]

Joe-

I am sure you have been reading all of the posts about different cameras. I have worked some commissionings and would be glad to discuss some camera options with you. I have looked at them all.

OJ Utter
Level III itc Thermographer
oj@upivib.com
402-534-3513

[Mario A. Kyriacou, CHI]

Start with the training first, Level1 will give you an indication as to what camera you really require for your purposes.

ITC FLIR Training is by far the best in the industry, and so are the Cameras.

[John McKenna]

Originally Posted by Johnny Boysz

You've got to be kidding right??? Then you will certify him as a professional thermographer?? That is certainly one of the biggest laughs on this BB!!

Engineer Joe,

If you plan to attend a Level I training class then look to the real professionals who know what they are doing. These would be the properly certified Level III NDT trained specialists, such as OJ Utter above, and not this joke!

You have never taken our course and hide behind an alias as a
non-member. I doubt you have ever used an IR camera.

Please Note: Johnny Boysz is a non-member guest and is in no
way affiliated with InterNACHI or its members.

[cbottger]

Originally Posted by dandersen

Consider me to do the work for you!
Save time and money!

If you commission buildings, you have enough to do!

I'm with you David you take east of the Mississippi and I will go West we both know where the airports are located. Very Hard to beat Flir for training they have some of the highly regarded level 111's there are in the industry my favorite is Bob Rogers took both my level one and two training with him