http://s280.photobucket.com/albums/kk164/cab1961/S%20-%20L/
A couple of the right tools sure would help it stick better if they were used right!
http://i280.photobucket.com/albums/kk164/cab1961/S%20-%20L/SU1HMDA3MzMtMjAxMTExMTMtMTUxNC5qcGc.jpg
http://i280.photobucket.com/albums/kk164/cab1961/S%20-%20L/SU1HMDA3MzQtMjAxMTExMTMtMTUxNC5qcGc.jpg
http://i280.photobucket.com/albums/kk164/cab1961/S%20-%20L/SU1HMDA3MzUtMjAxMTExMTMtMTUxNS5qcGc.jpg
The scarfire/scratcher is the preferred tool for the job but the notched trowel will do the same job and help keep it the same depth!
Sure helps the Faux stone/glorified finish stick to the scratch cote and lath!
](http://us.mg1.mail.yahoo.com/neo/[IMG]http://i280.photobucket.com/albums/kk164/cab1961/S%20-%20L/SU1HMDA3MzgtMjAxMTExMTMtMTUzNS5qcGc-1.jpg[/IMG])http://i280.photobucket.com/albums/kk164/cab1961/S%20-%20L/SU1HMDA3MzgtMjAxMTExMTMtMTUzNS5qcGc-1.jpg
![http://us.mg1.mail.yahoo.com/neo/[IMG]http://i280.photobucket.com/albums/kk164/cab1961/S%20-%20L/SU1HMDA3MzgtMjAxMTExMTMtMTUzNS5qcGc-1.jpg[/IMG]](http://us.mg1.mail.yahoo.com/neo/%5BIMG%5Dhttp://i280.photobucket.com/albums/kk164/cab1961/S%20-%20L/SU1HMDA3MzgtMjAxMTExMTMtMTUzNS5qcGc-1.jpg%5B/IMG%5D){kind=link}
Kickouts preferably the DRYFLEKT if not then one with sealed/folded seams that will kick the water out into the gutters and not down the face of the cladding sure would help a lot too!
In this set of installation videos what do you see used for scratching/notching the wall so the stone will adhere better?
http://www.canyon-stone.com/#/HOW-TO-VIDEO-06-00/
And in the pictures that are in the links do you see any scratch cote or kickouts,weepscreed,casing/66 bead around all of the edges for the backer rod and sealant joint?
And the windows and FAUX wood trim are also improperly installed.