the Main Bonding Jumper

[aerb]

Just watching Nick and Joe Tedesco in the Nachi.tv electrical episodes

In a service entrance electrical panel I can not see anything that would be the Main Bonding Jumper ?

I dont see anything green in this service entrance panel.
there is some steel wool above the panel, it looks like it is rusty, along with some corrosion on the panel, would you say that the drip loop could be incorrect? or a different problem?

This panel is only a few months old.

[tdietrich1 (Thomas H. Dietrich)]

Look for a diagram on the inside walls of the panel. Look for words like “bonding”. Then look there for the method of bonding.

tom

[gbeaumont (Gerry Beaumont)]

@aerb

Just watching Nick and Joe Tedesco in the Nachi.tv electrical episodes

In a service entrance electrical panel I can not see anything that would be the Main Bonding Jumper ?

I dont see anything green in this service entrance panel.
there is some steel wool above the panel, it looks like it is rusty, along with some corrosion on the panel, would you say that the drip loop could be incorrect? or a different problem?

This panel is only a few months old.

Amy, I see you are having problems posting a picture.

Please email it to me and I’ll see if I can help you out and also post it to the board for others.

gerrybeaumont@aol.com

Regards

Gerry