Go Back   InterNACHI Inspection Forum > >


Inspecting HVAC Systems Topics include heating, venting, and air conditioning inspections.

Thread Tools
Old 3/29/10, 11:40 PM
Russell J. Hensel's Avatar
Russell J. Hensel Russell J. Hensel is offline
Certified Professional Inspector (CPI) ®
Join Date: Jul 2008
Location: My house
Posts: 9,833
Default AMD series 5000, surface mount

I have a house with AMD series 5000 surface mount type , with the use of the Surface Mount Frame which is Type 1, the neck is 3-1/2” smaller than the Ceiling opening. But where the duct meets the diffuser there is no tape, no mastic, no nothing. Is this correct? The house has foam insulation. I cannot google anything about it. Info needed, thanks in advance.

Comprehensive Building Consultants
Naples Home Inspection, Naples Mold Inspection, Naples Radon Inspection, Bonita Springs Home Inspection, Bonita Springs Mold Inspection, Bonita Springs Radon Inspection.

Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pictures tell a great story mlarson Miscellaneous Discussion for Inspectors 59 9/16/09 5:31 PM
low-e glass with bronze tinting Scott Schultz Exterior Inspections 4 9/2/08 1:32 PM
Long Hairline cracks in a gypsum lath ceiling rkie Interior Inspections 5 5/17/08 4:27 PM
surface mount receptacles for indoor brick wall Bill Rush Electrical Inspections 5 5/16/08 8:44 AM

All times are GMT -4. The time now is 9:33 AM.
no new posts