|
Inspecting HVAC Systems Topics include heating, venting, and air conditioning inspections. |
![]() |
|
Thread Tools |
#1
|
|||
|
|||
Please Note:
Keith McKinley is a non-member guest and is in no way affiliated with InterNACHI or its members.
![]()
Can anyone suggest the proper way to do this? Is there a standard fitting to accomplish this? The 6" round is stubbed off in a joist bay at present so all options are available.
Thank you, Keith McKinley |
#2
|
||||
|
||||
![]()
Try this ductwork diagram.
Same diagram with interactive rollover for details. http://www.standexadp.com/sysmappr.htm Register boot detail. http://www.standexadp.com/catproduct....htm&style=P13 Last edited by mlarson; 3/29/07 at 11:32 AM.. |
#3
|
||||
|
||||
![]()
6" round to a 3" x 12" will not cause excessive friction loss.
|
#4
|
|||
|
|||
Please Note:
Keith McKinley is a non-member guest and is in no way affiliated with InterNACHI or its members.
![]()
Thanks gentleman! In my mind I was making it a lot harder than it needed to be! I'll use a 6" 90 to the 6" to 3x12 transition and just extend the box (if needed) to my toe kick. Perfect!
Appreciate your time! Keith |
![]() |
Thread Tools | |
|
|