dmacy
(David C. Macy, CMI)
January 21, 2007, 6:57pm
1
Home was built in 1924. Newer whirlpool tub that is not properly GFCI protected.
I see a large amount of whirlpool tubes that discharge a lovely amount of black debris.
What is a good product to clean the whirlpool jets?
My main question is it looks like they capped the vent & this looks like a good location for a air admittance valve.
http://www.oatey.com/aav_public/why_vent.html
How would you call this drainage system.
I didnt see a trap even though there may be one. The tub drain somewaht slowly.
Thanks
rcooke
(Roy D. Cooke, Sr)
January 21, 2007, 7:24pm
2
dmacy:
Home was built in 1924. Newer whirlpool tub that is not properly GFCI protected.
I see a large amount of whirlpool tubes that discharge a lovely amount of black debris.
What is a good product to clean the whirlpool jets?
My main question is it looks like they capped the vent & this looks like a good location for a air admittance valve.
http://www.oatey.com/aav_public/why_vent.html
How would you call this drainage system.
I didnt see a trap even though there may be one. The tub drain somewaht slowly.
Thanks
I would say if asked how to clean the tub to follow the manufactures recommendation .
I want to stay away from the following .
( I no nothing ) (Remember Colonel Clink)
http://www.httg.com/hot_tubs_whirlpools_baltimore_md.html
Roy Cooke
mboyett
(Michael Boyett, TREC #7290 (Ret) Boerne, TX)
January 21, 2007, 7:36pm
3
After reading that article Roy, I don’t think I even want to inspect whirlpool tubs anymore :shock: .
dmacy
(David C. Macy, CMI)
January 21, 2007, 7:39pm
4
Actually it was Sergent shulze.
I know nothing but I wonder why I am here.
rcooke
(Roy D. Cooke, Sr)
January 21, 2007, 7:52pm
5
Thanks I loved that guy he did well.
Hot tubs scare me big time I hope to not get pulled in .
Roy Cooke