mmaizel
(Marvin Maizel, CMI® Fl State Lic HI 681)
1
I have 8 hats that I have made using CMI hats that Nick donated (Thanks Nick).
They will protect your head from nails and minor head bumps while in an attic or similar.
They are CMI hats so I can only send them to CMI’s.
All I need is a pledge of $25 or a return after you try them for a while ( A few inspections).
If they work well I will also start to make them with INACHI hats (With Nick’s help) and blanks.
These do not have vents in the side ( A little hot) but the final version will.
mauger
(Mike Auger, CMI - RI 43685, RMC-142, RMB-096)
8
Come on you know that hat is only for high EMF attics, that can be seen from the mother ship.
mmaizel
(Marvin Maizel, CMI® Fl State Lic HI 681)
9
Mike;
I would like to send you one of these hats and get your feedback on the positives and negatives and if you still like the bump hat insert better after comparing the two. Please send me your address
I need a “bump shirt” as I seem to have more holes in the backside of my clothes after many narrow attics.
Dom.
mauger
(Mike Auger, CMI - RI 43685, RMC-142, RMB-096)
11
Marvin, address sent, I’ll send you feedback…
mauger
(Mike Auger, CMI - RI 43685, RMC-142, RMB-096)
12
bump shirt, fine, may as well have superhero shaped muscles in there too…
mmaizel
(Marvin Maizel, CMI® Fl State Lic HI 681)
13
Thanks Mike;
Will ship tomorrow.
mauger
(Mike Auger, CMI - RI 43685, RMC-142, RMB-096)
14
I tried the hat, I was sent a prototype:
This CMI hat had a shell inside that would protect my head from bumps, pokes, and scrapes in an attic or crawlspace. The hat still looked like a regular baseball style hat with a shell to protect the top of my head. It remained very adjustable, not too stiff. The material used was firm, but light weight too. I’m told a future version may also have vents built in so the hat wont get too hot. Overall its worth consideration for those of us who bump their heads in tight quarters. I like the hat.
Understand its not a helmet or hard hat. It is basically a bump hat, it’ll stop bumps, nails, scrapes etc…
mmaizel
(Marvin Maizel, CMI® Fl State Lic HI 681)
15
Thanks for trying the hat Mike.
If anyone else would like to test the hat please send me your address.