Go Back   InterNACHI Inspection Forum > >

Notices

Thermal Imaging, Infrared Cameras & Energy Audits Contains discussions about thermal imaging, infrared cameras, energy audits, and more.

Reply
 
Thread Tools
  #1  
Old 6/12/18, 9:06 PM
Charley L. Bottger's Avatar
Charley L. Bottger Charley L. Bottger is offline
Certified Professional Inspector (CPI)
 
Join Date: Apr 2004
Location: North Central Okla
Posts: 10,619
Default Another use for my IR camera

I found another anomaly today that I had never thought about before. The thermal overloads on an electrical furnace have female spade connectors on the wire that fit over the male side of the overload and those female spades anneal with heat and expand out creating loose connections that burn off with time. I have cut off a million of those and replaced them why I never thought of this before I know not. I was actually looking at a bad wire nut connection on the service wire when I notice the hot spot on the overload.
Attached Thumbnails
Another use for my IR camera-ir_21747-jpg   Another use for my IR camera-ir_21748-jpg  



http://www.oklahomathermalinfraredimaging.com/
http://www.freedomexpressinspections.com/
Master HVAC Mechanic Retired
Level III Thermographer # 8486 Infraspection Institute
CMI Certified Master Inspector
Residential/Commercial Inspections
Moisture Intrusion Expert Witness
55 years in the Trades
Okla State License # 130
580-268-3340
Reply With Quote
  #2  
Old 6/12/18, 11:54 PM
William B. Ogletree's Avatar
William B. Ogletree William B. Ogletree is online now
Certified Professional Inspector (CPI) ®
 
Join Date: Apr 2017
Location: Grapevine, Texas
Posts: 1,181
Default Re: Another use for my IR camera

This is the sort of post I would hope to see in the "Found with IR" thread I started.

Thanks for sharing!




William Bruce Ogletree
Ogletree Inspection Services

214-287-4630
www.ogletreehi.com
ogletreehi@gmail.com
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 7:04 AM.
no new posts