Free Webinar: How to Perform Deck Inspections

Learn how to inspect residential and commercial wood decks with confidence in this free webinar. You’ll learn a step-by-step approach to evaluating deck safety, structure, and compliance, plus a review of all common deck defects—from loose railings to improper ledger attachments. This training will sharpen your skills, strengthen your reports, and help you ensure that every deck you inspect is safe and sound.

Show Notes

Webinar summary for Free CE Webinar: How to Perform Deck Inspections (11/18/2026)

Quick recap

The webinar focused on how to perform residential wood deck inspections according to InterNACHI standards of practice. Andy Kuszak led the technical presentation, explaining that deck inspections should follow the order of construction, starting from the bottom. He covered deck load requirements, the importance of proper footings and support posts, and the risks of using undersized 4x4 posts or precast concrete blocks on disturbed soil. The discussion detailed common defects such as improper ledger board attachment, lack of flashing, and the dangers of face-mounting beams. Andy explained the importance of using the correct terminology, such as distinguishing between decks, porches, verandas, balconies, and patios. He also reviewed guard and handrail safety standards, including height, infill spacing, and graspability. The session included practical tips like the pick test for wood decay and the hammer test for loose fasteners. Andy shared real-world examples from litigation inspections to illustrate the consequences of poor construction and the importance of following manufacturer installation instructions. 

Summary

Deck Inspection Webinar Training

Andy began the main presentation, discussing the importance of deck inspections, common defects, and safety considerations, while reiterating guidelines for questions and email verification. The session covered the InterNACHI Home Inspection Standards of Practice as they relate to deck inspections, highlighting key areas to assess.

Deck Inspection Terminology and Standards

Andy discussed the importance of using correct terminology when inspecting decks and other structures to maintain credibility and confidence in inspection reports. He explained deck load requirements, including the need for proper support based on IRC standards, and distinguished between freestanding and attached decks. Andy also covered footing requirements, noting that footings are not needed for certain types of freestanding decks, and emphasized the importance of following proper construction standards to avoid future issues.

Deck Construction Standards Discussion

Andy discussed deck construction standards and common defects, emphasizing the importance of proper post restraint and footing installation. He explained that for decks over 20 inches high, posts should be at least 6x6 inches and no higher than 12 feet, with 14-foot heights acceptable only if using 8x8 posts with cross-bracing. Andy addressed questions from Nick and Steven about specific construction practices, noting that precast footers are extremely common defects and that bedrock installations would be difficult to evaluate due to unknown variables in rock composition.

Wood Decay and Inspection Guidelines

Andy then resumed the discussion on moisture and wood decay, emphasizing the importance of inspecting support posts below grade and the factors that can exacerbate decay, such as lawn sprinklers and downspouts. Andy also discussed common issues with post installation and the need for proper grading and drainage around decks.

Deck Water Damage Prevention Solutions

Andy discussed common deck issues related to water damage, including problems caused by downspouts and the lack of gutters, emphasizing the importance of proper water diversion to prevent deterioration of deck supports. He explained the pick test for detecting decay in wood and outlined requirements for notching support posts and connecting girders or beams, stressing the need for adequate material thickness to ensure structural integrity. Andy also addressed improper mounting methods, such as face mounting, and suggested repair options like sistering additional supports as alternatives to complete replacement.

Lumber Construction Requirements Discussion

Andy discussed code requirements for notches and holes in lumber joists and beams, explaining the specific measurements and locations that must be followed. He explained methods for checking beam sag, including using a carpenter's level and looking for indicators like crushing and gaps at support posts. When addressing a question from Justin about the causes of construction errors, Andy concluded that they result from both lack of education and cutting corners, often due to inexperienced contractors who underbid projects and take shortcuts. The discussion concluded with details about proper ledger attachment methods, emphasizing the importance of using lag screws or through bolts with appropriate spacing and washers to prevent deck collapse.

Deck Ledger Board Installation Standards

Andy discussed deck ledger board installation standards and common issues. He explained that older decks with bolts directly on top of each other may develop cracking, and advised against caulk as it can trap water and exacerbate deterioration. Andy covered requirements for band joists, joist hangers, and ledger board specifications, noting that fasteners must be staggered and manufactured products require following specific installation instructions. He also addressed the proper spacing between band joists and ledger boards, allowing up to 1 inch of open space for sheathing and drainage, and discussed challenges with attaching ledgers to open web floor trusses in different code areas.

Webinar Continuing 

Andy discussed proper deck ledger board support, emphasizing that ledger boards should not be supported by brick veneer or stucco and should be flashed appropriately to prevent moisture damage. He also explained the hammer test method for checking the security of through bolts or lag screws in deck connections.

Deck Inspection Standards and Requirements

Andy provided detailed guidance on deck inspection standards and requirements, covering topics including ledger board installation, cantilevers, lateral connections, guards and handrails, and electrical requirements. He emphasized that ledger boards should never be installed over residential siding without proper flashing and wall cutout, and explained the proper methods for identifying and supporting band joists. Andy also discussed the importance of checking for sagging in cantilevers, proper handrail installation requirements including return ends, and safety concerns around guard height and spacing requirements to prevent child access. The discussion included practical examples of common defects he had observed in deck installations, particularly issues with notched 4x4 support posts and improper joist seating in hangers.

Deck Construction Code Violations

Andy presented a detailed inspection of a problematic deck construction that violated multiple building codes and standards, including improper band joist mounting, undersized posts, missing flashing, and incorrect joist hanger installations. He then shared findings from a litigation case in Missouri where code enforcement was limited due to lack of state licensing requirements, instead holding the contractor accountable to specific product installation instructions from TimberTech Pro and Simpson StrongTie. The session concluded with a brief discussion about warped deck boards, explaining that such issues can result from either manufacturing defects or improper installation, particularly when joists are not level or boards are not properly crowned.

Length:

long
Originally broadcast on Nov 18, 2026